Your Amazon Fire TV won’t respond to remote commands if the batteries are low or dead. Bluetooth interference and obstruction from nearby devices can also cause Amazon Fire TV Remote failure. This post covers several troubleshooting steps for Amazon Fire TV Remote issues.
1. Move Remote Closer and Check for Interference
Amazon Fire TV Remotes are Bluetooth-powered with a 25-30 feet operating range. Your Fire TV may not respond to its remote if both devices are out of range or too far apart.
Ensure your Fire TV and its remote are in the same room and within visible distance. Also, ensure the remote has a clear line of sight from the Fire TV.
Using your Fire TV device or remote near radiation-emitting devices—Wi-Fi router, wireless speaker, microwave oven, etc.—can cause interference. We recommend turning off these devices or moving them away from your Fire TV device/remote.
2. Use the Fire TV Remote App
The Amazon Fire TV app is a mobile remote that works like the physical Fire TV Remote. The app is easy to use and compatible with all Fire TV models. Power on your Fire TV and follow the steps below to set up and use the Fire TV app.
- Download the Amazon Fire TV app from the App Store (for iPhone/iPad) or Google Play Store (for Android).
- Next, connect your mobile device to the same Wi-Fi network as your Fire TV.
- Open the Amazon Fire TV app and wait for it to detect your Fire TV device. Select your device in the “Connect to Remote” section to proceed.
You should see a “Fire TV Remote – Ready to pair” entry on the search page when your Fire TV detects the remote.
- Enter the code in the Amazon Fire TV app and tap the Checkmark icon to proceed.
Use the on-screen navigation and buttons on the Amazon Fire TV app home screen to control your Fire TV device.
3. Reinsert or Replace the Batteries
Your Amazon Fire TV Remote may malfunction or stop working if the batteries are low or dead. Also, dropping your remote on hard surfaces can dislodge the batteries and cause the remote to stop working. You can check the status of your Fire TV Remote in the Fire TV settings menu.
Go to Settings > Controllers & Bluetooth Devices > Amazon Fire TV Remotes > Amazon Fire TV Remote and check the “Battery” section on the right sidebar.
Change the remote’s batteries if your Fire TV says they’re “Offline.”
Open your Fire TV Remote’s back cover and check that the batteries are secure and inserted correctly. Also, ensure you align the battery polarities—positive (+) and negative (-) sides—in line with the inscriptions in the battery compartment.
Your Fire TV Remote batteries are likely dead if the remote control doesn’t work. Insert new batteries and check if that resolves the issue. We recommend the Amazon Basics AAA 1.5 Volt alkaline batteries—the 8-pack unit retails for $5.98 on Amazon.com.
Replace both batteries with new units. Your Fire TV Remote might malfunction if you replace one battery or mix old and new batteries.
4. Unpair and Re-Pair the Remote
Disconnect the remote from your Fire TV and pair it from scratch if the issue persists. You must pair a secondary remote with your Fire TV to unpair the physical remote. Link the Amazon Fire TV app to your Fire TV and follow the steps below to unpair the unresponsive remote.
- Go to Settings > Controllers & Bluetooth Devices > Amazon Fire TV Remotes > Amazon Fire TV Remote.
- Tap the Menu icon (in the Amazon Fire TV) app to unpair the remote.
- Next, tap the Select icon to confirm the unpairing.
- Select Add New Remote to re-pair the remote to your Fire TV.
- Press and hold the Home button on the Fire TV remote for ten seconds to put it in pairing mode.
You should see “Fire TV Remote – Ready to pair” on the search page when your Fire TV detects the remote.
- Tap the Select icon in the Amazon Fire TV app to pair/connect the remote to your Fire TV.
The remote should now appear on the list of controllers. Reboot your Fire TV if the remote still doesn’t work.
5. Power Cycle Your Fire TV
Temporary system glitches can make your Amazon Fire TV unresponsive to remote commands. Rebooting your Fire TV can fix system malfunctions and get the streaming device (and remote) working correctly.
Disconnect your Amazon Fire TV from its power source or turn off the power outlet. Wait 5-10 seconds, reconnect the Fire TV to the power supply, and check if it detects the remote.
5. Update Your Fire TV
Updating your Fire TV’s software to the latest version can resolve performance issues. Connect your Fire TV to the internet and use the Amazon Fire TV app to check for software updates.
Go to Settings > My Fire TV > About and select Check for Updates or Install Update.
6. Reset Your Fire TV Remote
Resetting your Fire TV Remote to factory default can get it working correctly again. The factory reset procedure for Fire TV Remotes varies depending on your Fire TV or remote model/generation.
How to Reset Alexa Voice Remote (1st Generation)
Unplug your Fire TV from its power source and follow the steps below.
- Press and hold the Left and Menu buttons simultaneously for at least 12 seconds.
- Release both buttons and wait five seconds.
- Open the back cover and remove both batteries from the remote.
- Plug or reconnect your Fire TV to its power source.
- Reinsert the batteries in the remote when you see a screen that says the Fire TV can’t detect your remote.
- Press the Home button to reconnect the remote to your Fire TV device.
How to Reset Fire TV Remote (Basic Edition)
- Press and hold the Home button.
- Press the Menu button three times while holding the Home button.
- Release the Home button and press the Menu button nine times.
- Open the back plate/cover of the Fire TV Remote and remove the batteries.
- Next, unplug your Fire TV from its power source.
- Reinsert the batteries in the remote and plug your Fire TV back into its power source.
- Press and hold the Home button on the remote when your Fire TV boots the home screen. The remote should pair with your Fire TV in about 40-60 seconds.
How to reset Fire TV Remote (Other Models/Editions)
Unplug your Amazon Fire TV device from the power outlet and follow the steps below.
- Press and hold the Left, Menu, and Back buttons on your remote for at least 12 seconds.
- Release all three buttons, wait five seconds, and remove the batteries from your remote.
- Connect your Fire TV to the power outlet and wait for it to boot the Home screen. You should see a “We can’t detect your remote” message on your TV screen.
- Reinsert the batteries in the remote and press the Home button.
The remote should automatically pair with your Fire TV device. Otherwise, press and hold the Home button for ten seconds to pair it manually.
7. Restore Your Fire TV to Factory Settings
Factory resetting your Fire TV can resolve remote malfunctions and other issues. Reset your Fire TV to factory settings if the remote doesn’t work after exhausting all troubleshooting steps.
Resetting your Fire TV wipes everything on the streaming device—settings, installed apps, saved data, etc. Our tutorial on factory resetting Fire TV devices explains everything that happens when you reset Fire TV.
Use the Amazon Fire TV app to reset your Fire TV—since your physical Fire TV Remote isn’t working.
Go to Settings > My Fire TV > Reset to Factory Defaults and select Reset on the confirmation screen.
Buy and Pair a Replacement Remote
Your Fire TV Remote is likely defective if it still doesn’t work after trying the above troubleshooting solutions. If your Fire TV is under warranty, contact Amazon Customer Service for a (free) remote replacement. Otherwise, buy a new remote and pair it in the Fire TV settings menu.
When your new remote arrives, head to Settings > Controllers & Bluetooth Devices > Amazon Fire TV Remotes.
Afterward, press and hold the Home button on the remote for ten seconds to pair it to your Fire TV.
Refer to our tutorial on pairing Fire TV Remote for more details on linking replacement remotes to Fire TV devices.