Fix CLOCK_WATCHDOG_TIMEOUT Blue Screen Error on Windows 10


CLOCK WATCHDOG TIMEOUT Blue Screen Stop Error can occur on a Windows system when the specified processor is not processing interrupts. It usually happens when the processor is nonresponsive or is deadlocked. This error occurs when the processor is having problems with the co-operation of its cores and threads. The threads are tasks performed by the cores, and some cores can have many threads simultaneously. The problem is that one thread is waiting for an adequate response from another thread – or one kernel is waiting for a response from another kernel – and those responses are not coming. In technical terms, when the processor is not able to continue processing of tasks because its resources are occupied and are interdependent to get free, this state is called as Deadlock. So, today, we will be trying how to fix this Blue Screen error and prevent it from happening in the future.


The CLOCK_WATCHDOG_TIMEOUT bug check has a value of 0x00000101. This indicates that an expected clock interrupt on a secondary processor, in a multi-processor system, was not received within the allocated interval.


The following potential fixes will be carried out to fix BSOD errors related to error CLOCK WATCHDOG TIMEOUT on Windows 10,

  1. Rollback a recently updated device driver
  2. Run Windows Memory Diagnostics Tool
  3. Disconnect new hardware.
  4. Troubleshoot in Clean Boot State.
  5. Update the BIOS.

If you tend to create a System Restore point usually, you can try to undo any modifications on your computer, by performing System Restore. Secondly, it is recommended that you carry out these tasks mentioned below in Safe Mode with Networking only.

If you Overclocked your system, first undo the overclocking and see if that makes the BSOD go away.

1] Rollback a recently updated device driver

If you recently updated your driver, I suggest you rollback your driver and see if that helps.

2] Run Windows Memory Diagnostics Tool

To fix any issues with your RAM, follow these steps.

Run the Memory Check on your computer. Start by hitting the WINKEY + R button combination to launch the Run utility. Then type in, mdsched.exe and then hit Enter. It will launch the Windows Memory Diagnostic Tool and will give out two options-

  1. Restart now and check for problems (Recommended)
  2. Check for problems the next time I start my computer

Now, according to the option selected by you, the computer will restart and check for memory based problems.

If you get any issues there, it will fix it automatically else if no issues are detected, this is probably not the cause of the issue.

3] Disconnect new hardware

You can try to disconnect any new hardware device you recently plugged in. This error can also be triggered if the newly installed device is keeping the processor engaged with various instructions like faulty driver installation and more.

Hence, it is recommended to remove any such hardware devices one by one and check if that fixes your issues. And if you find that particular device that triggers the error, you can just check if the latest driver for it is stable enough with your operating system.

4] Troubleshoot in Clean Boot state

You can troubleshoot further manually by performing a Clean Boot. A Clean Boot starts a system with minimal drivers and startup programs. When you start the computer in clean boot, the computer starts by using a pre-selected minimal set of drivers and startup programs, and because the computer starts with a minimal set of drivers, some programs may not work as you expected.

Clean-boot troubleshooting is designed to isolate a performance problem. To perform clean-boot troubleshooting, you must disable or enable one process at a time, and then restart the computer after each action. If the problem goes away, you know that it was the last process which was creating the problem.

5] Updating the BIOS

The BIOS is a sensitive part of a computer. Though it is a software component, the functioning of the hardware largely depends on it. Hence, you should be highly careful when modifying anything in the BIOS. I would recommend you to skip this method if you do not know what you are doing or do not know how to do it particularly.

To update the BIOS, start by hitting the WINKEY + R button combination to start the Run box and type in msinfo32 and then finally hit Enter.

This will open System Information. On the bottom, you will find a search field; there you have to search for BIOS Version and hit Enter.

There, you will be able to see the version and developer of the BIOS installed on your computer.

Now, you go to your manufacturer’s website and then get the latest version of BIOS downloaded on to your computer.

If you happen to use a laptop, make sure that you keep it plugged in until this BIOS update is installed.

Double-click on the newly downloaded file to install the new version of the BIOS. Once done, just Reboot your computer for the changes to take effect.

In a case that you use an assembled CPU to run your copy of Windows 10, it would be a bit complicated for you. If you do not see a proper manufacturer’s name in the System Information window, you will have to check the website of your motherboard’s manufacturer. Once you visit the website, go to the downloads section of the website to get the latest version of the BIOS for your computer. Usually, American Megatrends’ are used to assemble computers, but in either case, you can even check Windows Updates for any new version of BIOS available for your computer.

Original Article

Leave a Comment