Samba is used by sysadmin to overcome the problem of interoperability in a mixed environment where you have both Linux and Windows. It provides a common platform for both Windows and Linux to have a common sharing space.
Domain controller is a service which is used for centralized administration of users, groups or any objects in the network. This service enables us to manage, authenticate, and secure the users login and related data.
This tutorial explains how we can configure Samba on Linux as a primary domain controller.
1. Setup Proper Host Name
Make sure you’ve setup the appropriate hostname and static ip. If you are using internal ip-address, and if you like to access it from the internet, setup appropriate NAT rules on your firewall.
In this tutorial will use tgs.example.com as the hostname.
# vi /etc/sysconfig/network HOSTNAME=tgs.example.com
Make sure it has appropriate static ip-address setup in the ifcfg-eth0 file.
# vi /etc/sysconfig/network-script/ifcfg-eth0 IPADDR=192.168.101.1 NETMASK=255.255.255.0
Also, assign the gateway and dns accordingly in your /etc/sysconfig/network and /etc/resolv.conf file.
Verify that your /etc/hosts file has an entry similar to the following.
# vi /etc/hosts 192.168.101.1 tgs.example.com tgs
Also, make sure NTP service is setup and running properly on this server.
2. Install Samba from Source
On CentOS, by default samba packages will not be installed for minimal installation type.
First, install the following dependent packages.
# yum install glibc glibc-devel gcc python* libacl-devel krb5-workstation krb5-libs pam_krb5 git-core openldap-devel
Next, download the samba source as shown below.
# git clone git://git.samba.org/samba.git sambaserver
The files will be downloaded to sambaserver directory. Install the samba server as shown below.
cd sambaserver ./configure --enable-debug --enable-selftest make make install
Samba will be installed in the default location /usr/local/samba/bin. You’ll see several samba client utilities installed under this directory.
# cd /usr/local/samba/bin/ # ls cifsdd ldbsearch ntdbrestore regshell smbcquotas tdbbackup dbwrap_tool locktest ntdbtool regtree smbget tdbdump eventlogadm masktest ntlm_auth rpcclient smbpasswd tdbrestore gentest ndrdump oLschema2ldif samba-tool smbspool tdbtool ldbadd net pdbedit sharesec smbstatus testparm ldbdel nmblookup pidl smbcacls smbtar wbinfo ldbedit nmblookup4 profiles smbclient smbta-util ldbmodify ntdbbackup regdiff smbclient4 smbtorture ldbrename ntdbdump regpatch smbcontrol smbtree
3. Setup Domain Provision
To start the domain provision, execute the samba-tool as shown below. This will pickup the default hostname and domain name from the configuration files.
# /usr/local/samba/bin/samba-tool domain provision Realm [EXAMPLE.COM]: Domain [EXAMPLE]: Server Role (dc, member, standalone) [dc]: DNS backend (SAMBA_INTERNAL, BIND9_FLATFILE, BIND9_DLZ, NONE) [SAMBA_INTERNAL]: DNS forwarder IP address (write 'none' to disable forwarding) [126.96.36.199]: 188.8.131.52 Administrator password: Retype password: ... ... Adding DNS accounts Creating CN=MicrosoftDNS,CN=System,DC=example,DC=com Creating DomainDnsZones and ForestDnsZones partitions Populating DomainDnsZones and ForestDnsZones partitions Setting up sam.ldb rootDSE marking as synchronized Fixing provision GUIDs A Kerberos configuration suitable for Samba 4 has been generated at /usr/local/samba/private/krb5.conf Once the above files are installed, your Samba4 server will be ready to use Server Role: active directory domain controller Hostname: tgs NetBIOS Domain: EXAMPLE DNS Domain: example.com DOMAIN SID: S-1-5-21-2869186506-3515775153-2841826798
4. Start Samba Service
Start the samba service, as shown below.
Add the following entry to rc.local file to make sure samba service starts automatically during system startup.
# echo /usr/local/samba/sbin/samba >> /etc/rc.d/rc.local # cat /etc/rc.d/rc.local touch /var/lock/subsys/local /usr/local/samba/sbin/samba
5. Check Samba Version
YOu can verify the samba version using samba or smbclient command as shown below.
# /usr/local/samba/sbin/samba -V Version 4.2.0pre1-GIT-913b2a1 # /usr/local/samba/bin/smbclient -V Version 4.2.0pre1-GIT-913b2a1
The following command will display all Samba shares that are currently available.
# /usr/local/samba/bin/smbclient -L localhost -U% Domain=[EXAMPLE] OS=[Windows 6.1] Server=[Samba 4.2.0pre1-GIT-913b2a1] Sharename Type Comment --------- ---- ------- netlogon Disk sysvol Disk IPC$ IPC IPC Service (Samba 4.2.0pre1-GIT-913b2a1) Domain=[EXAMPLE] OS=[Windows 6.1] Server=[Samba 4.2.0pre1-GIT-913b2a1] Server Comment --------- ------- Workgroup Master --------- -------
Verify that you are able to login using the administrator username and password.
# /usr/local/samba/bin/smbclient //localhost/netlogon -Uadministrator -c 'ls' Enter administrator's password: Domain=[EXAMPLE] OS=[Windows 6.1] Server=[Samba 4.2.0pre1-GIT-913b2a1] . D 0 Fri Feb 21 15:06:15 2014 .. D 0 Fri Feb 21 15:06:28 2014 57901 blocks of size 8388608. 54372 blocks available
6. Verify Domains
Now let us check if the domain is functioning as expected. Check the SRV and A record as shown below.
# host -t SRV _ldap._tcp.example.com _ldap._tcp.example.com has SRV record 0 100 389 tgs.example.com. # host -t SRV _kerberos._udp.example.com _kerberos._udp.example.com has SRV record 0 100 88 tgs.example.com. # host -t A tgs.example.com tgs.example.com has address 192.168.101.1
Use the samba-tool command to verify the realm name as shown below.
# /usr/local/samba/bin/samba-tool testparm --suppress-prompt | grep realm realm = EXAMPLE.COM
7. Configure Kerberos
Copy the sample krb5.conf file to the /etc directory.
cp /usr/local/samba/share/setup/krb5.conf /etc/krb5.conf
Set the default_realm to your domain name. In this case, we’ll set it to example.com
# cat /etc/krb5.conf [libdefaults] default_realm = EXAMPLE.COM dns_lookup_realm = false dns_lookup_kdc = true
Use kinit command to make sure the Kerberos is setup properly as shown below.
# kinit administrator@EXAMPLE.COM Password for administrator@EXAMPLE.COM: Warning: Your password will expire in 41 days on Fri Apr 4 15:06:25 2014
Finally, you can use Windows remote administrator tool to connect to the Samba server and use it as a domain controller.
If you face any issues during the above process, make sure you bring the system up-to-date by updating all packages. You can also disable SELinux temporarily, and review the audit.log for any SELinux related error messages. Also, make sure your IPTables rules are not blocking the ports that are required by Samba to communicate between the servers.
- Ubuntu MATE & Budgie Drop 32-bit ISOs
- Ubuntu crontab – Automate System Tasks
- How to Fix 503 Service Unavailable Error in WordPress
- How to Fix Broken Packages on Ubuntu 16.04 and Debian 9
- How to install Jekyll on CentOS 7
- How To Install Buildbot on CentOS 7
- How to Fix Secure Connection Error in WordPress
- How to Set Up Nginx High Availability Cluster using Pacemaker on CentOS 7
- How to List Ubuntu Network Adapters – Top 5 Commands to Display Ethernet Adapters